- Purpose: Describe the benefits and features of using this software bundle for Cisco Mobility Express. - Requirements: List the prerequisites and compatibility for installing this software bundle. | | H2: How to download air-ap2800-k9-me-8-3-133-0.tar from Cisco.com? | - Step 1: Log in to Cisco.com with your credentials. - Step 2: Navigate to the Software Download page for Cisco Mobility Express for Aironet 2800. - Step 3: Select the latest release (8.3.133.0) and download the .tar file. - Step 4: Verify the checksum and file size of the downloaded file. | | H2: How to install air-ap2800-k9-me-8-3-133-0.tar on your access point? | - Step 1: Connect your access point to a TFTP server and power it on. - Step 2: Access the access point console and enter the privileged EXEC mode. - Step 3: Enter the archive download-sw command with the TFTP server IP address and the .tar file name as parameters. - Step 4: Wait for the installation process to complete and reboot the access point. | | H2: How to verify the installation of air-ap2800-k9-me-8-3-133-0.tar on your access point? | - Step 1: Access the access point console and enter the show version command. - Step 2: Check the output for the software version, image name, and build date. - Step 3: Enter the show ap image all command to see the active and backup images on the access point. | | H2: How to configure your access point as a Mobility Express controller? | - Step 1: Connect your laptop to the pre-defined CiscoAirProvision SSID advertised by the access point. - Step 2: Launch a web browser and enter https://mobilityexpress.cisco.com in the address bar. - Step 3: Follow the initial configuration wizard to set up your Mobility Express network parameters, such as network name, password, admin username, admin password, country code, etc. - Step 4: Click Finish to complete the configuration and reboot the access point. | | H2: How to manage your Mobility Express network using the web interface? | - Step 1: Connect your laptop to your Mobility Express network SSID or use a wired connection to the access point. - Step 2: Launch a web browser and enter https:// in the address bar. - Step 3: Log in with your admin username and password. - Step 4: Explore the dashboard, monitor, configure, and troubleshoot tabs to view and modify various settings and options for your network. | | H1: Conclusion | - Summary: Recap the main points of the article and highlight the benefits of using air-ap2800-k9-me-8-3-133-0.tar for Cisco Mobility Express. - Call to action: Encourage readers to try out this software bundle and provide feedback or questions. | Table 2: Article with HTML formatting
What is air-ap2800-k9-me-8-3-133-0.tar and why do you need it?
If you are looking for a simple, reliable, and affordable wireless solution for your small or medium-sized business, you might want to consider Cisco Mobility Express. Cisco Mobility Express is a virtual wireless LAN controller integrated on Cisco Aironet 802.11ac Wave 2 access points, such as Aironet 2800 Series.
Air-ap2800-k9-me-8-3-133-0.tar is a software bundle that contains the Cisco Mobility Express image for Aironet 2800 Series access points, as well as the software images for other supported access points in your network. By installing this software bundle on your access point, you can convert it into a Mobility Express controller that can manage up to 100 access points and 200
Some of the benefits and features of using air-ap2800-k9-me-8-3-133-0.tar for Cisco Mobility Express are:
It supports the latest 802.11ac Wave 2 standard, which offers faster speeds, higher capacity, and better performance for your wireless network.
It allows you to deploy and manage your wireless network without the need for a dedicated hardware controller, saving you time and money.
It provides a web-based interface that lets you easily configure, monitor, and troubleshoot your network from any device.
It offers advanced security features, such as WPA3, 802.1X, rogue detection, and Cisco TrustSec.
It integrates with Cisco DNA Center, Cisco Prime Infrastructure, and Cisco Connected Mobile Experiences (CMX) for enhanced network visibility and analytics.
To install air-ap2800-k9-me-8-3-133-0.tar on your access point, you need to meet the following requirements:
Your access point must be a Cisco Aironet 2800 Series model that supports Mobility Express. You can check the model number on the label at the back of the device.
Your access point must have enough free flash memory to store the software bundle. You can check the available flash memory by entering the dir flash: command on the access point console.
Your access point must be running a compatible software version. You can check the current software version by entering the show version command on the access point console. The recommended software version for upgrading to air-ap2800-k9-me-8-3-133-0.tar is 8.2.166.0 or later.
You must have a TFTP server that can host the software bundle file and is reachable by your access point.
You must have a console cable that can connect your laptop to your access point.
How to download air-ap2800-k9-me-8-3-133-0.tar from Cisco.com?
To download air-ap2800-k9-me-8-3-133-0.tar from Cisco.com, you need to follow these steps:
Log in to Cisco.com with your credentials. If you do not have an account, you can create one for free.
Select the latest release (8.3.133.0) and click on the Download icon next to the air-ap2800-k9-me-8-3-133-0.tar file name.
Accept the End User License Agreement and click on Download Now.
Save the file to your laptop or a USB drive.
Verify the checksum and file size of the downloaded file. You can use a tool like MD5 Calculator or SHA256 Calculator to generate and compare the checksums. The checksum and file size of air-ap2800-k9-me-8-3-133-0.tar are as follows:
If the checksums or file size do not match, you need to download the file again.
How to install air-ap2800-k9-me-8-3-133-0.tar on your access point?
To install air-ap2800-k9-me-8-3-133-0.tar on your access point, you need to follow these steps:
Connect your access point to a TFTP server and power it on. You can use a crossover Ethernet cable or a switch to connect them.
Access the access point console using a console cable and a terminal emulator program, such as PuTTY or HyperTerminal. The default settings for the console connection are 9600 baud, 8 data bits, no parity, 1 stop bit, and no flow control.
Enter the privileged EXEC mode by entering the enable command and the password, if prompted.
Enter the archive download-sw command with the TFTP server IP address and the .tar file name as parameters. For example, if your TFTP server IP address is 192.168.1.100 and your .tar file name is air-ap2800-k9-me-8-3-133-0.tar, enter the following command:
Wait for the installation process to complete and reboot the access point. The process may take several minutes and you will see messages indicating the progress and status on the console.
How to verify the installation of air-ap2800-k9-me-8-3-133-0.tar on your access point?
To verify the installation of air-ap2800-k9-me-8-3-133-0.tar on your access point, you need to follow these steps:
Access the access point console and enter the show version command. You should see output similar to this:
Cisco IOS Software, C2800 Software (AP3G2-K9W8-M), Version 8.3.133.0, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Compiled Wed 15-Mar-23 10:15 by prod_rel_team ROM: Bootstrap program is C2800 boot loader BOOTLDR: C2800 Boot Loader (AP3G2-BOOT-M) Version 15.3(3)JF10, RELEASE SOFTWARE (fc1) AP2800 uptime is 5 minutes System returned to ROM by reload System image file is "flash:/ap3g2-k9w8-mx.153-3.JF10/ap3g2-k9w8-mx.153-3.JF10" Last reload reason: Reload Command cisco AIR-AP2802I-A-K9 (PowerPC) processor (revision A0) with 1015808K/8192K bytes of memory. Processor board ID FGL2345A123 PowerPC CPU at 800Mhz, revision number 0x2151 Last reset from power-on 1 Gigabit Ethernet interface 1 802.11 Radio(s) 32K bytes of flash-simulated non-volatile configuration memory. Base ethernet MAC Address: A4:B2:39:12:34:56 Part Number : 73-18794-05 PCA Assembly Number : 800-43222-05 PCA Revision Number : A0 PCB Serial Number : FOC23456ABC Top Assembly Part Number : 074-12345-01 Top Assembly Serial Number : FGL2345A123 Top Revision Number : A0 Product/Model Number : AIR-AP2802I-A-K9 Configuration register is 0xF
Check the output for the software version, image name, and build date. They should match the information of air-ap2800-k9-me-8-3-133-0.tar.
Enter the show ap image all command to see the active and backup images on the access point. You should see output similar to this:
AP Images: AP Image type:MOBILITY EXPRESS IMAGE AP Configuration:MOBILITY EXPRESS CAPABLE Primary Image : 8.3.133.0 (default) (active) Backup Image : 8.2.166.0
If the active image is not 8.3.133.0, you can use the ap-type mobility-express primary-base command to set it as the primary image and reboot the access point.
How to configure your access point as a Mobility Express controller?
To configure your access point as a Mobility Express controller, you need to follow these steps:
Connect your laptop to the pre-defined CiscoAirProvision SSID advertised by the access point. The default password is password.
Launch a web browser and enter https://mobilityexpress.cisco.com in the address bar.
Follow the initial configuration wizard to set up your Mobility Express network parameters, such as network name, password, admin username, admin password, country code, etc.
Click Finish to complete the configuration and reboot the access point.
After the reboot, your access point will become a Mobility Express controller and will start broadcasting your network SSID. You can connect your other devices to your network and enjoy the wireless connectivity.
How to manage your Mobility Express network using the web interface?
To manage your Mobility Express network using the web interface, you need to follow these steps:
Connect your laptop to your Mobility Express network SSID or use a wired connection to the access point.
Launch a web browser and enter https:// in the address bar. You can find the IP address of the controller by entering the show ip interface brief command on the access point console.
Log in with your admin username and password.
Explore the dashboard, monitor, configure, and troubleshoot tabs to view and modify various settings and options for your network. You can also access the CLI of the controller by clicking on the Advanced tab and selecting Command Line Interface.
The web interface provides a user-friendly and intuitive way to manage your Mobility Express network. You can see the status and performance of your network, access points, and clients. You can also configure various parameters, such as wireless settings, security settings, guest access, quality of service, etc. You can also troubleshoot any issues or errors that may occur on your network.
Conclusion
In this article, we have learned what air-ap2800-k9-me-8-3-133-0.tar is and why you need it for Cisco Mobility Express. We have also learned how to download, install, verify, configure, and manage this software bundle on your Aironet 2800 Series access point. By using this software bundle, you can enjoy the benefits of a simple, reliable, and affordable wireless solution for your small or medium-sized business.
If you have any questions or feedback about this article or Cisco Mobility Express, please feel free to contact us. We would love to hear from you and help you with your wireless needs. Thank you for reading and have a great day!
Frequently Asked Questions
What is Cisco Mobility Express?
Cisco Mobility Express is a virtual wireless LAN controller integrated on Cisco Aironet 802.11ac Wave 2 access points. It allows you to deploy and manage a wireless network without the need for a dedicated hardware controller.
What are the benefits of Cisco Mobility Express?
Cisco Mobility Express offers a simple, reliable, and affordable wireless solution for small or medium-sized businesses. It supports the latest 802.11ac Wave 2 standard, which offers faster speeds, higher capacity, and better performance for your wireless network. It also provides a web-based interface that lets you easily configure, monitor, and troubleshoot your network from any device. It also offers advanced security features, such as WPA3, 802.1X, rogue detection, and Cisco TrustSec. It also integrates with Cisco DNA Center, Cisco Prime Infrastructure, and Cisco Connected Mobile Experiences (CMX) for enhanced network visibility and analytics.
What is air-ap2800-k9-me-8-3-133-0.tar?
Air-ap2800-k9-me-8-3-133-0.tar is a software bundle that contains the Cisco Mobility Express image for Aironet 2800 Series access points, as well as the software images for other supported access points in your network. By installing this software bundle on your access point, you can convert it into a Mobility Express controller that can manage up to 100 access points and 2000 clients.
How do I download air-ap2800-k9-me-8-3-133-0.tar?
You can download air-ap2800-k9-me-8-3-133-0.tar from Cisco.com by logging in with your credentials and navigating to the Software Download page for Cisco Mobility Express for Aironet 2800. You need to select the latest release (8.3.133.0) and download the .tar file. You also need to verify the checksum and file size of the downloaded file.
How do I install air-ap2800-k9-me-8-3-133-0.tar?
You can install air-ap2800-k9-me-8-3-133-0.tar on your access point by connecting it to a TFTP server and powering it on. You need to access the access point console and enter the privileged EXEC mode. You need to enter the archive download-sw command with the TFTP server IP address and the .tar file name as parameters. You need to wait for the installation process to complete and reboot the access point.
I hope this article has helped you understand how to download and install air-ap2800-k9-me-8-3-133-0.tar on your Aironet 2800 Series access point and how to use it for Cisco Mobility Express. If you have any questions or feedback, please feel free to contact me. I'm happy to help you with your wireless needs.